Saved

Sell

Search

Flatbed Body Only Truck Bodys For Sale Near ridgway, Massachusetts

Looking to buy a Element Se 7x16 6'6" Tall Landscaper Prep flatbed body only in Ridgway, Massachusetts? Browse our extensive inventory of new and used Element Se 7x16 6'6" Tall Landscaper Prep flatbed body only from local dealers and private sellers in Ridgway, Massachusetts. Compare prices, models, trims, options and specifications between different flatbed body onlies on Commercial Truck Trader.
close
38
We Suggest Trying These Similar Searches:

Suggested Listings

2024 SWITCH-N-GO FLATBEDS BODY in Winder, GA
$5,950

New 2024 SWITCH-N-GO Roll Off Body Only

FLATBEDS BODY
Stock # FLATBEDS
<p><strong>IN STOCK,</strong> 11FT SWITCH-N-GO DIAMOND-PLATED FLATBED, STAKE POCKETS, RUB RAIL AOUND ENTIRE BODY, (4) TIE DOWN HOOKS, OVER 100+ BODIES IN STOCK AT ALL TIMES, WINDER, GA…</p><p>11FT - 5,950.00 IN STOCK</p><p>— Structural steel construction with zinc prime & powder coated finish — Body widths are 90" for the deck and 94.5" outside — Inside bulkhead heights are high visibility in 39" or 51" — Body lengths include 1' beavertail, bodies without beavertail will receive stake pockets on rear — Floors on 9' to 12' are constructed with 1/8" steel diamond plate — Floors on 13' to 15' are constructed with 3/16" steel diamond plate — Crossmembers are constructed with 3" structural channel on 16" centers — External stake pockets are constructed on 24" centers with 3/8" x 2" flat bar rub rail — Chain tie-down key holes in floor at the four corners — Beavertail bodies receive integrated steel 4" steel ground rollers or no beavertail bodies receive standard 6" steel ground rollers</p><p> </p>
Hackett Sales,Inc.
Winder, GA
2024 J&I SE in Sycamore, IL
$1,995

New 2024 J&I Flatbed Body Only

SE
Stock # J32408
New J&I SE Flatbed body only, 8.5' long x 82 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Economy - Smooth sides (No rubrail), No hitches, No lights taillight (4 marker lights only), No harness, Bed will fit 56-58" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I SE. Weighs approx Unknown lbs. Serial # J32408. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8&apos; long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I SE in Sycamore, IL
$2,055

New 2024 J&I Flatbed Body Only

SE
Stock # J32409
New J&I SE Flatbed body only, 9.3' long x 96 inch wide, 60 inch cab to axle, 34 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Economy - Smooth sides (No rubrail), No hitches, No lights taillight (4 marker lights only), No harness, Bed will fit 56-58" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I SE. Weighs approx Unknown lbs. Serial # J32409. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I SE in Sycamore, IL
$1,995

New 2024 J&I Flatbed Body Only

SE
Stock # J32407
New J&I SE Flatbed body only, 8.5' long x 82 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Economy - Smooth sides (No rubrail), No hitches, No lights taillight (4 marker lights only), No harness, Bed will fit 56-58" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I SE. Weighs approx Unknown lbs. Serial # J32407. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8&apos; long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I SE in Sycamore, IL
$1,995

New 2024 J&I Flatbed Body Only

SE
Stock # J32406
New J&I SE Flatbed body only, 8.5' long x 82 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Economy - Smooth sides (No rubrail), No hitches, No lights taillight (4 marker lights only), No harness, Bed will fit 56-58" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I SE. Weighs approx Unknown lbs. Serial # J32406. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8&apos; long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I SE in Sycamore, IL
$1,965

New 2024 J&I Flatbed Body Only

SE
Stock # J32397
New J&I SE Flatbed body only, 7' long x 82 inch wide, 40 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Economy - Smooth sides (No rubrail), No hitches, No lights taillight (4 marker lights only), No harness, Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I SE. Weighs approx Unknown lbs. Serial # J32397. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- SHORT bed (6.5&apos; long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I SE in Sycamore, IL
$1,965

New 2024 J&I Flatbed Body Only

SE
Stock # J32394
New J&I SE Flatbed body only, 7' long x 82 inch wide, 40 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Economy - Smooth sides (No rubrail), No hitches, No lights taillight (4 marker lights only), No harness, Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I SE. Weighs approx Unknown lbs. Serial # J32394. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- SHORT bed (6.5&apos; long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I SE in Sycamore, IL
$1,965

New 2024 J&I Flatbed Body Only

SE
Stock # J32399
New J&I SE Flatbed body only, 7' long x 82 inch wide, 40 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Economy - Smooth sides (No rubrail), No hitches, No lights taillight (4 marker lights only), No harness, Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I SE. Weighs approx Unknown lbs. Serial # J32399. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- SHORT bed (6.5&apos; long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I SE in Sycamore, IL
$1,995

New 2024 J&I Flatbed Body Only

SE
Stock # J32400
New J&I SE Flatbed body only, 8.5' long x 82 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Economy - Smooth sides (No rubrail), No hitches, No lights taillight (4 marker lights only), No harness, Bed will fit 56-58" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I SE. Weighs approx Unknown lbs. Serial # J32400. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8&apos; long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I SE in Sycamore, IL
$1,965

New 2024 J&I Flatbed Body Only

SE
Stock # J32398
New J&I SE Flatbed body only, 7' long x 82 inch wide, 40 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Economy - Smooth sides (No rubrail), No hitches, No lights taillight (4 marker lights only), No harness, Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I SE. Weighs approx Unknown lbs. Serial # J32398. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- SHORT bed (6.5&apos; long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I SE in Sycamore, IL
$1,965

New 2024 J&I Flatbed Body Only

SE
Stock # J32396
New J&I SE Flatbed body only, 7' long x 82 inch wide, 40 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Economy - Smooth sides (No rubrail), No hitches, No lights taillight (4 marker lights only), No harness, Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I SE. Weighs approx Unknown lbs. Serial # J32396. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- SHORT bed (6.5&apos; long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I SE in Sycamore, IL
$1,965

New 2024 J&I Flatbed Body Only

SE
Stock # J32395
New J&I SE Flatbed body only, 7' long x 82 inch wide, 40 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Economy - Smooth sides (No rubrail), No hitches, No lights taillight (4 marker lights only), No harness, Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I SE. Weighs approx Unknown lbs. Serial # J32395. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- SHORT bed (6.5&apos; long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I SE in Sycamore, IL
$1,995

New 2024 J&I Flatbed Body Only

SE
Stock # J32403
New J&I SE Flatbed body only, 8.5' long x 82 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Economy - Smooth sides (No rubrail), No hitches, No lights taillight (4 marker lights only), No harness, Bed will fit 56-58" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I SE. Weighs approx Unknown lbs. Serial # J32403. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8&apos; long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 J&I SE in Sycamore, IL
$1,965

New 2024 J&I Flatbed Body Only

SE
Stock # J32393
New J&I SE Flatbed body only, 7' long x 82 inch wide, 42 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Economy - Smooth sides (No rubrail), No hitches, No lights taillight (4 marker lights only), No harness, Bed will fit 38-42" CA trucks. May have minor shipping & handling damage (scratches/dings/dents)., color: Black. Mfg part # J&I SE. Weighs approx Unknown lbs. Serial # J32393. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- SHORT bed (6.5&apos; long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
Purchase In Progress
Another customer has started purchasing this motorcycle. By providing your information below, we can let you know if this motorcycle becomes available again.
Please enter a valid first name.
Please enter a valid last name.
Please enter a valid email.
Please enter a valid phone number.
By using this site, you agree to our Terms of Use & our Privacy Policy.
Disclaimers

Commercial Truck Trader Disclaimer: The information provided for each listing is supplied by the seller and/or other third parties. CommercialTruckTrader.com is not responsible for the accuracy of the information. Please refer to the Commercial Truck Trader Terms of Use for further information.