LOAD TRAIL Gooseneck Truck Body Body For Sale Near mchenry, Illinois

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.AS IS Load Trail LT-SD Flatbed body only, 9.3' long x 84 inch wide, 60 inch cab to axle, 34 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - 2FTB, 2RTB, 21k 2.5" rear hitch, 30k GN hitch, AS IS (bed is too narrow for DRW trucks - requires modification like adding fenders), Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # SD840946034SS_48128. Weighs approx 1334 lbs. Serial # 4ZESD0866N3267635. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Single Wheel Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Single Wheel Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Single Wheel Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).Please measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.AS IS Load Trail LT-SD Flatbed body only, 9.3' long x 84 inch wide, 60 inch cab to axle, 34 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - 2FTB, 2RTB, 21k 2.5" rear hitch, 30k GN hitch, AS IS (bed is too narrow for DRW trucks - requires modification like adding fenders), Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # SD840946034SS_48128. Weighs approx 1334 lbs. Serial # 4ZESD0863N3267592. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Single Wheel Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Single Wheel Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Single Wheel Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).Please measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.AS IS Load Trail LT-FD Flatbed body only, 9.3' long x 84 inch wide, 60 inch cab to axle, 34 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, AS IS (bed is too narrow for DRW trucks - requires modification like adding fenders), Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # FD840946034SS_47404. Weighs approx 1070 lbs. Serial # 4ZESD0867N3268552. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail width- Headache Rack height: 45.5 or 48 inch- Note: Bed is too narrow for DRW trucks - requires modification like adding fenders. Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).Please measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.AS IS Load Trail LT-FD Flatbed body only, 9.3' long x 84 inch wide, 60 inch cab to axle, 34 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, AS IS (bed is too narrow for DRW trucks - requires modification like adding fenders), Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # FD840946034SS_47404. Weighs approx 1070 lbs. Serial # 4ZESD0864N3273837. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail width- Headache Rack height: 45.5 or 48 inch- Note: Bed is too narrow for DRW trucks - requires modification like adding fenders. Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).Please measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.AS IS Load Trail LT-FD Flatbed body only, 9.3' long x 84 inch wide, 60 inch cab to axle, 34 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, AS IS (bed is too narrow for DRW trucks - requires modification like adding fenders), Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # FD840946034SS_47404. Weighs approx 1070 lbs. Serial # 4ZESD0860N3265024. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail width- Headache Rack height: 45.5 or 48 inch- Note: Bed is too narrow for DRW trucks - requires modification like adding fenders. Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).Please measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 8.5' long x 97 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, will also work for 56-57 inch CA trucks, color: Black. Mfg part # FD970865242SS. Weighs approx 1081 lbs. Serial # 4ZEFD0866R3313925. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 8.5' long x 97 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, will also work for 56-57 inch CA trucks, color: Black. Mfg part # FD970865242SS. Weighs approx 1081 lbs. Serial # 4ZEFD0864R3313924. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, color: Black. Mfg part # FD970946034SS. Weighs approx 1079 lbs. Serial # 4ZEFD0868R3313831. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, color: Black. Mfg part # FD970946034SS. Weighs approx 1079 lbs. Serial # 4ZEFD0869R3312283. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, color: Black. Mfg part # FD970946034SS. Weighs approx 1079 lbs. Serial # 4ZEFD0860R3312284. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, color: Black. Mfg part # FD970946034SS. Weighs approx 1079 lbs. Serial # 4ZEFD0863R3312280. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 8.5' long x 97 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, will also work for 56-57 inch CA trucks, color: Black. Mfg part # FD970865242SS. Weighs approx 1081 lbs. Serial # 4ZEFD086XR3313927. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 8.5' long x 97 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, will also work for 56-57 inch CA trucks, color: Black. Mfg part # FD970865242SS. Weighs approx 1081 lbs. Serial # 4ZEFD0863R3313929. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, color: Black. Mfg part # FD970946034SS. Weighs approx 1079 lbs. Serial # 4ZEFD0865R3312281. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 8.5' long x 97 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, will also work for 56-57 inch CA trucks, color: Black. Mfg part # FD970865242SS. Weighs approx 1081 lbs. Serial # 4ZEFD0861R3313928. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.