Trucks For Sale Near huntington, Illinois

New CM ALRD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALRD-03976034SD. Weighs approx 687 lbs. Serial # MX00401750. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALRD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALRD-03976034SD. Weighs approx 687 lbs. Serial # MX00401751. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALRD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALRD-03976034SD. Weighs approx 687 lbs. Serial # MX00401746. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALRD Flatbed body only, 8.5' long x 84 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALRD-02845638. Weighs approx 491 lbs. Serial # MX00392216. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 1998-2016Axle Type: Single Wheel Long BedHeadache Rack height: 45.5 inch--- OR ---Make: Ram (Dodge)Years: 2002-EarlierAxle Type: Single Wheel Long BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.NOS CM ALRD Flatbed body only, 8.5' long x 84 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Aluminum. Mfg part # ALRD-02845842. Weighs approx 491 lbs. Serial # MX00367991. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 2017-2019Axle Type: Single Wheel Long BedHeadache Rack height: 45.5 or 48 inchNote: SD HR (48 inch) recommended for Super Duty trucks.--- OR ---Make: Ram (Dodge)Years: 2003-PresentAxle Type: Single Wheel Long BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.NOS CM ALRD Flatbed body only, 8.5' long x 84 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Aluminum. Mfg part # ALRD-02845842. Weighs approx 491 lbs. Serial # MX00372761. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 2017-2019Axle Type: Single Wheel Long BedHeadache Rack height: 45.5 or 48 inchNote: SD HR (48 inch) recommended for Super Duty trucks.--- OR ---Make: Ram (Dodge)Years: 2003-PresentAxle Type: Single Wheel Long BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.NOS CM ALRD Flatbed body only, 8.5' long x 84 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Aluminum. Mfg part # ALRD-02845842. Weighs approx 491 lbs. Serial # MX00373721. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 2017-2019Axle Type: Single Wheel Long BedHeadache Rack height: 45.5 or 48 inchNote: SD HR (48 inch) recommended for Super Duty trucks.--- OR ---Make: Ram (Dodge)Years: 2003-PresentAxle Type: Single Wheel Long BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.NOS CM ALRD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Aluminum. Mfg part # ALRD-03976034SD. Weighs approx 687 lbs. Serial # MX00388158. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUG

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.NOS CM ALRD Flatbed body only, 8.5' long x 97 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Aluminum. Mfg part # ALRD-02975842. Weighs approx 597 lbs. Serial # MX00367400. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 2017-2019Axle Type: Dually (bed delete)Headache Rack height: 45.5 or 48 inchNote: SD HR (48 inch) recommended for Super Duty trucks.--- OR ---Make: Ram (Dodge)Years: 2003-PresentAxle Type: Dually (bed delete)Headache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.NOS CM ALRD Flatbed body only, 8.5' long x 97 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Aluminum. Mfg part # ALRD-02975842. Weighs approx 597 lbs. Serial # MX00367401. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 2017-2019Axle Type: Dually (bed delete)Headache Rack height: 45.5 or 48 inchNote: SD HR (48 inch) recommended for Super Duty trucks.--- OR ---Make: Ram (Dodge)Years: 2003-PresentAxle Type: Dually (bed delete)Headache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.AS IS CM ALRD Flatbed body only, 7' long x 84 inch wide, 38 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Aluminum. Mfg part # ALRD-01843842. Weighs approx 491 lbs. Serial # MX00348906. Will this bed fit my truck?  This is the standard recommendation for a:Make: Ram (Dodge)Years: 2003-PresentAxle Type: Single Wheel Short BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.AS IS CM ALRD Flatbed body only, 7' long x 84 inch wide, 42 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), GM, TC, 2.5" 24k rear hitch, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Aluminum. Mfg part # ALRD-01844242GM. Weighs approx 491 lbs. Serial # MX00348911. Will this bed fit my truck?  This is the standard recommendation for a:Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Single Wheel Short BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.AS IS CM ALRD Flatbed body only, 7' long x 84 inch wide, 38 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Aluminum. Mfg part # ALRD-01843842. Weighs approx 491 lbs. Serial # MX00348905. Will this bed fit my truck?  This is the standard recommendation for a:Make: Ram (Dodge)Years: 2003-PresentAxle Type: Single Wheel Short BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.AS IS CM ALRD Flatbed body only, 7' long x 84 inch wide, 42 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), GM, TC, 2.5" 24k rear hitch, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Aluminum. Mfg part # ALRD-01844242GM. Weighs approx 491 lbs. Serial # MX00348910. Will this bed fit my truck?  This is the standard recommendation for a:Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Single Wheel Short BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.AS IS CM ALRD Flatbed body only, 7' long x 84 inch wide, 42 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), GM, TC, 2.5" 24k rear hitch, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Aluminum. Mfg part # ALRD-01844242GM. Weighs approx 491 lbs. Serial # MX00348912. Will this bed fit my truck?  This is the standard recommendation for a:Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Single Wheel Short BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.