Flatbed Body Only Trucks For Sale Near coats, Florida

<p>20FT BODY, 14FT FLATBED WITH 6FT DOVE TAIL, 5FT RAMPS, WINCH 17,500LBS, ( 1 ) 5FT UNDERBODY BOXES, NEED AT LEAST 108" CAB TO AXLE, WINDER, GA…..</p><p> </p><p>PRICE - 7,900.00</p>

2000 UNKNOWN, 14 FT, Heavy Duty Trucks - Truck Bodies Only - Flatbed, , , SMOOTH STEEL DECK 49" BULKHEAD RUB RAILS' STAKE POCKETS 25" ON CENTER, Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Truck Craft TC-430 Flatbed body only, 11' long x 96 inch wide, 84 inch cab to axle, 34 inch frame rail width, Zeus Aluminum Dump Body for 84 inch CA w 14,000 to 19,000# GVWR, Drop down sides, 7 inch I-Beam Longsill, 2.375 inch Floor Plank, 4-5YD Cap, Std height 1/4 Cabguard, 16,600# Hoist, Mounting Kit included, Mud flap kit included, color: Aluminum. Mfg part # D1-04852. Weighs approx 1850 lbs. Serial # 430-00095. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM TM-DLX Flatbed body only, 9.3' long x 94 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), Deluxe, SD, OPB (belly box), Tailgate, Worklights, color: Black. Mfg part # TM-03946034SDDLX. Weighs approx 1582 lbs. Serial # KE00407141. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

2023 ZIMMERMAN, 12.5 FT, Medium Duty Trucks - Truck Bodies Only - Flatbed, , , 2023 ZIMMERMAN 6000XL FLATBED, 12.5 FT LONG, ALUMINUM BED, 97\' WIDE PLUS RUB RAIL,LED LIGHTS, EXTENDED RACK HEIGHT, Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN 1Z9ZC971502303244

New CM ALRD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALRD-03976034SD. Weighs approx 687 lbs. Serial # MX00401750. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALRD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALRD-03976034SD. Weighs approx 687 lbs. Serial # MX00401751. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALRD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALRD-03976034SD. Weighs approx 687 lbs. Serial # MX00401746. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.NOS CM ALTM Flatbed body only, 9.3' long x 94 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), Alum, SD, Tailgate, 2 Worklights, 2.5" 24k rear hitch, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Aluminum. Mfg part # ALTM-03946034SD. Weighs approx 1386 lbs. Serial # M400382225. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALRD Flatbed body only, 8.5' long x 84 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALRD-02845638. Weighs approx 491 lbs. Serial # MX00392216. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 1998-2016Axle Type: Single Wheel Long BedHeadache Rack height: 45.5 inch--- OR ---Make: Ram (Dodge)Years: 2002-EarlierAxle Type: Single Wheel Long BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALSK Flatbed body only, 7' long x 84 inch wide, 40 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-01844038. Weighs approx 585 lbs. Serial # MV00411339. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 1998-2016Axle Type: Single Wheel Short BedHeadache Rack height: 45.5 inch--- OR ---Make: Ram (Dodge)Years: 2002-EarlierAxle Type: Single Wheel Short BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALSK MODEL:Aluminum full length skirt w rolled fenders & ATP trimSteel frame constructionQty 4* Aluminum Toolboxes (recessed, lockable, T-handle latches, 2 on each side *Some 7' beds only have a total of 2 boxes)Extruded aluminum deckIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.NOS Switch N Go SNG Flatbed body only, 11' long x 96 inch wide, N/A inch cab to axle, N/A inch frame rail width, Dump Body with Drop Sides - 18" Cab shield, (4) corner D-rings, 10 GA Floor, 12" Contractor Fold Down Side Height & 24" Tailgate Height, Sides: 12 GA Sheet, Tailgate: 2" X 2" X 3/16" Tubing & 10 GA Sheet, Bulkhead: Inside Height 39" For 48" High Truck Cabs, Crossmembers: 3" Structural Channel 16" on Center, Top Rail: 3" X 3" X 1/8" Tubing, Volume: 3.1 Cubic Yards, Powdura OneCure Zinc Epoxy Primer & Super Durable TGIC Topcoat. Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # 6944811 DB-11-DS. Weighs approx 1956 lbs. Serial # 3325201. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALSK-DLX Flatbed body only, 9.3' long x 94 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), Deluxe, SD, Taller 2FTB (TM style), 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-03946034SD-DLX. Weighs approx 821 lbs. Serial # MV00396629. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALSK-DLX MODEL: Aluminum full length skirt w rolled fenders & ATP trim Steel frame construction Qty 4 Aluminum Toolboxes - (2) Standard Integrated in Rear and (2) Tall Vertical Integrated in Front (36 inches wide) 4 chrome T-handle twist compression latches, lockable, flush integrated 11.3&apos; Models may include MEGABOX toolbox configuration (54 inches wide w suicide doors) - or - (4) Standard Integrated in Rear and (2) Tall Vertical Integrated in Front (36 inches wide) Extruded aluminum deck Integrated aluminum headache rack Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted) Sealed wiring harness 7 pin plug LED lights Aluminum rubrail with stake pockets Tapered corners for max turning radius Powdercoat steel chassis. (Not available for 7&apos; short bed models) TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.F

New CM ALSK Flatbed body only, 9.3' long x 94 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2FTB, 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-03946034SD. Weighs approx 821 lbs. Serial # MV00401758. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALSK MODEL:Aluminum full length skirt w rolled fenders & ATP trimSteel frame constructionQty 4* Aluminum Toolboxes (recessed, lockable, T-handle latches, 2 on each side *Some 7' beds only have a total of 2 boxes)Extruded aluminum deckIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of invento

New CM ALSK Flatbed body only, 9.3' long x 94 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2FTB, 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-03946034SD. Weighs approx 821 lbs. Serial # MV00401755. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALSK MODEL:Aluminum full length skirt w rolled fenders & ATP trimSteel frame constructionQty 4* Aluminum Toolboxes (recessed, lockable, T-handle latches, 2 on each side *Some 7' beds only have a total of 2 boxes)Extruded aluminum deckIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of invento