New CM Truck Body BED Truck Bodys For Sale Near bristol, Illinois

New CM SB Service body only, 8.2' long x 78 inch wide, 56 inch cab to axle, N/A inch frame rail width, (6) boxes, 12" H Tailgate, (1) Fuel fill, Bumper, Universal Mounting kit included, color: White. Mfg part # CMG9878VVSSG2. Weighs approx 1095 lbs. Serial # M800395987. STANDARD FEATURES FOR CM SB G2 MODEL: 11-Gauge Galvaneal Deck 16-Gauge Galvaneal Body (A60) Removable Fender Panel Stainless Steel Rod & Socket Door Hinges Gas Cylinder Style Door Holders LED Rear Lighting with Wiring Harness Recessed Rear Bumper 1/8” Treadbrite Aluminum Compartment Tops Automotive Stainless Steel Rotary Latches Vise Socket in Bumper Conduit in Understructure Bolted Body for Secure Attachment Universal Body and Bumper Mounting Kit Automotive D-Bulb Weather Stripping Multi Panel Doors with Internal Reinforcements Toolbox Interior Powder Coated Heavy-Duty Rear Tailgate Two Shelves in the Front, One Shelf in the Rear TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM SK Flatbed body only, 8.5' long x 97 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Black. Mfg part # SK-02975638. Weighs approx 1259 lbs. Serial # KC00388835. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 1998-2016Axle Type: Dually (bed delete)Headache Rack height: 45.5 inch--- OR ---Make: Ram (Dodge)Years: 2002-EarlierAxle Type: Dually (bed delete)Headache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM SK MODEL:- All steel frame construction- Full length skirt w rolled fenders & ATP trim- Qty 4* Toolboxes (recessed, lockable, T-handle latches, 2 on each side)   --*Some 7' beds only have a total of 2 boxes- Tread plate deck- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALSK-DLX Flatbed body only, 9.3' long x 94 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), Deluxe, SD, Taller 2FTB (TM style), 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-03946034SD-DLX. Weighs approx 821 lbs. Serial # MV00396629. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALSK-DLX MODEL: Aluminum full length skirt w rolled fenders & ATP trim Steel frame construction Qty 4 Aluminum Toolboxes - (2) Standard Integrated in Rear and (2) Tall Vertical Integrated in Front (36 inches wide) 4 chrome T-handle twist compression latches, lockable, flush integrated 11.3' Models may include MEGABOX toolbox configuration (54 inches wide w suicide doors) - or - (4) Standard Integrated in Rear and (2) Tall Vertical Integrated in Front (36 inches wide) Extruded aluminum deck Integrated aluminum headache rack Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted) Sealed wiring harness 7 pin plug LED lights Aluminum rubrail with stake pockets Tapered corners for max turning radius Powdercoat steel chassis. (Not available for 7' short bed models) TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.F

New CM ALSK Flatbed body only, 9.3' long x 94 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2FTB, 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-03946034SD. Weighs approx 821 lbs. Serial # MV00401758. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALSK MODEL:Aluminum full length skirt w rolled fenders & ATP trimSteel frame constructionQty 4* Aluminum Toolboxes (recessed, lockable, T-handle latches, 2 on each side *Some 7' beds only have a total of 2 boxes)Extruded aluminum deckIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of invento

New CM RD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-03976034SD. Weighs approx 1100 lbs. Serial # MB00400930. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM SK Flatbed body only, 7' long x 97 inch wide, 38 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2RTB ONLY, 2.5" 24k rear hitch, color: Black. Mfg part # SK-01973842. Weighs approx 1138 lbs. Serial # KC00394117. Will this bed fit my truck?  This is the standard recommendation for a:Make: Ram (Dodge)Years: 2003-PresentAxle Type: Mega Cab Dually Short Bed (bed delete)Headache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM SK MODEL:- All steel frame construction- Full length skirt w rolled fenders & ATP trim- Qty 4* Toolboxes (recessed, lockable, T-handle latches, 2 on each side)   --*Some 7' beds only have a total of 2 boxes- Tread plate deck- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALSK Flatbed body only, 9.3' long x 94 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2FTB, 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-03946034SD. Weighs approx 821 lbs. Serial # MV00401755. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALSK MODEL:Aluminum full length skirt w rolled fenders & ATP trimSteel frame constructionQty 4* Aluminum Toolboxes (recessed, lockable, T-handle latches, 2 on each side *Some 7' beds only have a total of 2 boxes)Extruded aluminum deckIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of invento

New CM RD Flatbed body only, 8.5' long x 84 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-02845638. Weighs approx 910 lbs. Serial # MB00393726. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8' long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-03976034SD. Weighs approx 1100 lbs. Serial # MB00402361. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 8.5' long x 84 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-02845638. Weighs approx 910 lbs. Serial # MB00392082. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8' long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-03976034SD. Weighs approx 1100 lbs. Serial # MB00400920. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 8.5' long x 84 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-02845638. Weighs approx 910 lbs. Serial # MB00391233. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8' long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALSK-DLX Flatbed body only, 9.3' long x 94 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), Deluxe, SD, Taller 2FTB (TM style), 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-03946034SD-DLX. Weighs approx 821 lbs. Serial # MV00397588. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALSK-DLX MODEL: Aluminum full length skirt w rolled fenders & ATP trim Steel frame construction Qty 4 Aluminum Toolboxes - (2) Standard Integrated in Rear and (2) Tall Vertical Integrated in Front (36 inches wide) 4 chrome T-handle twist compression latches, lockable, flush integrated 11.3' Models may include MEGABOX toolbox configuration (54 inches wide w suicide doors) - or - (4) Standard Integrated in Rear and (2) Tall Vertical Integrated in Front (36 inches wide) Extruded aluminum deck Integrated aluminum headache rack Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted) Sealed wiring harness 7 pin plug LED lights Aluminum rubrail with stake pockets Tapered corners for max turning radius Powdercoat steel chassis. (Not available for 7' short bed models) TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.F

New CM RD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-03976034SD. Weighs approx 1100 lbs. Serial # MB00400918. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM SK Flatbed body only, 8.5' long x 97 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Black. Mfg part # SK-02975638. Weighs approx 1259 lbs. Serial # KC00392123. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 1998-2016Axle Type: Dually (bed delete)Headache Rack height: 45.5 inch--- OR ---Make: Ram (Dodge)Years: 2002-EarlierAxle Type: Dually (bed delete)Headache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM SK MODEL:- All steel frame construction- Full length skirt w rolled fenders & ATP trim- Qty 4* Toolboxes (recessed, lockable, T-handle latches, 2 on each side)   --*Some 7' beds only have a total of 2 boxes- Tread plate deck- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-03976034SD. Weighs approx 1100 lbs. Serial # MB00402349. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-03976034SD. Weighs approx 1100 lbs. Serial # MB00400919. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALRD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALRD-03976034SD. Weighs approx 687 lbs. Serial # MX00401750. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM SK Flatbed body only, 11.3' long x 94 inch wide, 84 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2FTB, 2RTB, 2.5" 24k rear hitch, color: Black. Mfg part # SK-04948434SD. Weighs approx 1441 lbs. Serial # KC00399107. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (84 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (84 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (84 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM SK MODEL:- All steel frame construction- Full length skirt w rolled fenders & ATP trim- Qty 4* Toolboxes (recessed, lockable, T-handle latches, 2 on each side)   --*Some 7' beds only have a total of 2 boxes- Tread plate deck- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.ron

New CM ALRD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALRD-03976034SD. Weighs approx 687 lbs. Serial # MX00401751. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM TM-DLX Flatbed body only, 8.5' long x 97 inch wide, 57 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), Deluxe, SD, OPB (belly box), Tailgate, Worklights, color: Black. Mfg part # TM-02975742DLX. Weighs approx 1567 lbs. Serial # KE00408145. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 2020-PresentAxle Type: Dually (bed delete)Headache Rack height: 45.5 inchNote: For skirted beds, 57 inch CA is ideal. A 56 inch CA will fit BUT there'll be a 1-2in gap between bed & cab. -*- OR -*- A 58 inch CA will fit BUT bed will be touching the cab & rear wheel won't be centered in the wheel well.Please measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALRD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALRD-03976034SD. Weighs approx 687 lbs. Serial # MX00401746. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM TM-DLX Flatbed body only, 9.3' long x 94 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), Deluxe, SD, OPB (belly box), Tailgate, Worklights, color: Black. Mfg part # TM-03946034SDDLX. Weighs approx 1582 lbs. Serial # KE00407141. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 11.3' long x 97 inch wide, 84 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, color: Black. Mfg part # RD-04978434SD. Weighs approx 1260 lbs. Serial # MB00400972. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (84 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 11.3' long x 97 inch wide, 84 inch cab to axle, 34 inch frame rail width, 55 inch headache rack height (overall from bottom of frame rails to top of HR), 4500 GMSD, 6" Runners, 2.5" 24k Rear hitch, color: Black. Mfg part # RD-04978434GMSD. Weighs approx 1337 lbs. Serial # MB00392903. Will this bed fit my truck?  This is the standard recommendation for a:Make: GM & International CVYears: 2019-PresentAxle Type: 4500/5500/6500 Medium Duty Dually Cab & Chassis (84 inch CA)Headache Rack height: 55 inchNote: Older Kodiak Topkick models require 60 inch headache rack.--- OR ---Make: FordYears: 2000-PresentAxle Type: F650/F750 Dually Cab & Chassis (84 inch CA)Headache Rack height: 55 inchNote: When buying a skirted (SK, ALSK, etc) bed, more information is required to determine if the bed will fit due to wheel size of the truck.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALRD Flatbed body only, 8.5' long x 84 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALRD-02845638. Weighs approx 491 lbs. Serial # MX00392216. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 1998-2016Axle Type: Single Wheel Long BedHeadache Rack height: 45.5 inch--- OR ---Make: Ram (Dodge)Years: 2002-EarlierAxle Type: Single Wheel Long BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALRD MODEL:Aluminum deck, sides & backSteel frame constructionIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 11.3' long x 97 inch wide, 84 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, color: Black. Mfg part # RD-04978434SD. Weighs approx 1260 lbs. Serial # MB00400971. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (84 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM SK Flatbed body only, 7' long x 84 inch wide, 42 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Black. Mfg part # SK-01844242. Weighs approx 937 lbs. Serial # MC00405726. Will this bed fit my truck?  This is the standard recommendation for a:Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Single Wheel Short BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM SK MODEL:- All steel frame construction- Full length skirt w rolled fenders & ATP trim- Qty 4* Toolboxes (recessed, lockable, T-handle latches, 2 on each side)   --*Some 7' beds only have a total of 2 boxes- Tread plate deck- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 8.5' long x 84 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-02845842. Weighs approx 910 lbs. Serial # MB00405499. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 8.5' long x 84 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-02845842. Weighs approx 910 lbs. Serial # MB00405496. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 8.5' long x 84 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-02845842. Weighs approx 910 lbs. Serial # MB00405494. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 8.5' long x 84 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-02845842. Weighs approx 910 lbs. Serial # MB00405493. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM SB Service body only, 6.8' long x 78 inch wide, 40 inch cab to axle, N/A inch frame rail width, (6) boxes, 12" H Tailgate, Masterlocks, (1) Fuel fill, Bumper, Universal Mounting kit included, color: White. Mfg part # CMG8278VVSSG2M. Weighs approx 1050 lbs. Serial # M800390850. STANDARD FEATURES FOR CM SB G2 MODEL: 11-Gauge Galvaneal Deck 16-Gauge Galvaneal Body (A60) Removable Fender Panel Stainless Steel Rod & Socket Door Hinges Gas Cylinder Style Door Holders LED Rear Lighting with Wiring Harness Recessed Rear Bumper 1/8” Treadbrite Aluminum Compartment Tops Automotive Stainless Steel Rotary Latches Vise Socket in Bumper Conduit in Understructure Bolted Body for Secure Attachment Universal Body and Bumper Mounting Kit Automotive D-Bulb Weather Stripping Multi Panel Doors with Internal Reinforcements Toolbox Interior Powder Coated Heavy-Duty Rear Tailgate Two Shelves in the Front, One Shelf in the Rear TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 11.3' long x 97 inch wide, 84 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, color: Black. Mfg part # RD-04978434SD. Weighs approx 1260 lbs. Serial # MB00413669. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (84 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 11.3' long x 97 inch wide, 84 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, color: Black. Mfg part # RD-04978434SD. Weighs approx 1260 lbs. Serial # MB00413666. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (84 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 11.3' long x 97 inch wide, 84 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, color: Black. Mfg part # RD-04978434SD. Weighs approx 1260 lbs. Serial # MB00413670. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (84 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 11.3' long x 97 inch wide, 84 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, 2.5" 24k rear hitch, color: Black. Mfg part # RD-04978434SD. Weighs approx 1260 lbs. Serial # MB00413673. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (84 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM SK Flatbed body only, 7' long x 84 inch wide, 40 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Black. Mfg part # SK-01844038. Weighs approx 937 lbs. Serial # KC00411340. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 1998-2016Axle Type: Single Wheel Short BedHeadache Rack height: 45.5 inch--- OR ---Make: Ram (Dodge)Years: 2002-EarlierAxle Type: Single Wheel Short BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM SK MODEL:- All steel frame construction- Full length skirt w rolled fenders & ATP trim- Qty 4* Toolboxes (recessed, lockable, T-handle latches, 2 on each side)   --*Some 7' beds only have a total of 2 boxes- Tread plate deck- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.